What’s the maximum span for metal roofing? Are you planning to replace your traditional shingle roof this year with a metal roof? This is a cost-effective decision and one that will add to the long-lasting beauty of your home.

However, since each home is different, it is important to measure your roof span accurately. Doing this ensures the proper amount of roofing material.

Here are some things to keep in mind.

Metal Roofing: Maximum Span

Corrugated metal roofing can be purchased in standard lengths and then can be cut to a specific size. The proper length span will vary depending on the type of corrugation, which describes the waves in the metal that give them their strength.

Deep corrugated panels are generally stronger and can be used in longer-span areas. Usually, panels of corrugated metal roofing typically come in 6-foot lengths.

Most often, sheets are ordered and then cut to the desired length, which ranges in size. Keep in mind that with order sheets cut to specific lengths ranging from A to Z, it is easiest to handle panels that are less than 16 feet in length.

Regarding metal roofing panels longer than 16 feet: Anyone who’s tried to handle a panel longer than that understands they’re difficult to handle.

To calculate how many panels you need and to get an accurate estimate of cost, keep in mind that the width of the panels should overlap by two inches.

When it comes to your roof replacement project, it can feel overwhelming to know where to start. That’s where the experts at Mountaintop Metal Roofing can help.

Your home’s roof is one of its most crucial parts, so ensuring that it is installed correctly is key.

A do-it-yourself roof installation project is not advised; it’s tedious and dangerous. Whether it’s 12 feet long or 45 feet long, a tin roof or high gauge metal with rafter spans is no job for the hobbyist.

Mountaintop Metal Roofing

Our residential metal roofing specialists have the knowledge, training, and hands-on experience to get the job done right the first time.

In addition, hiring professional installers ensures that you don’t have to rent or buy a variety of tools required to finish the roofing project — especially if you need to cut the roof panels to size.

Drills, nail guns, compressors, and other roof-specific tools are needed to get the job done, which can add more to the cost. Not to mention, if you install the roof panels incorrectly, you could be looking at damage to your home or expensive repairs to fix it.

You can trust our team at Mountaintop Metal Roofing! Contact us today to get a free quote on your roof replacement project.